中文无码一区二区不卡av_99久久精品看国产一区_亚洲中文色欧另类欧美动图_黑色丝袜无码中中文字幕

CNC lathe manufacturers talk about the safety knowledge of CNC lathe installation
CNC lathe manufacturers to install CNC instrument lathes to prevent deformation of the guide rails, bed feet and work surface to maintain level.
CNC lathes generally use spring chucks to clamp the workpiece. Before starting the machine, it must be confirmed that there are no hidden dangers that endanger the personal safety and equipment safety of you and other people around you. The machine tool is designed for mechatronics and must be trained to operate the machine. If you do not understand the operation method, do not operate and adjust the machine. Carefully read the operating instructions, system programming instructions, to understand its limitations. The main motor has two installation modes: horizontal belt pulley and vertical pulley. The horizontal installation motor and the machine are in the same plane; the vertical motor is installed under the machine. The V-belt that connects the spindle to the motor must be adjusted to the appropriate degree of elasticity.
After a certain period of time, the spindle bearings of the machine tool must be properly adjusted to ensure the best clearance of the bearings, so as to ensure the use of the machine and the stability of the products, and to increase the service life of the spindle bearings.