中文无码一区二区不卡av_99久久精品看国产一区_亚洲中文色欧另类欧美动图_黑色丝袜无码中中文字幕

CNC lathe manufacturers talk about several commonly used CNC lathes
The economical CNC lathe adopts the stepping motor and the single-chip microcomputer to transform the feeding system of the ordinary lathe into a simple CNC lathe, which has lower cost, but the degree of automation and function are relatively poor, and the turning precision is not high, which is suitable for the requirements. Turning of non-high rotary parts.
Ordinary CNC Lathe According to the requirements of turning machining, the CNC lathe is specially designed and equipped with a universal CNC system. The CNC system has strong functions, high degree of automation and machining accuracy, and is suitable for turning machining of general rotary parts. This CNC lathe can control two axes at the same time, namely the X axis and the Z axis.
The turning machining center adds C axis and power head on the basis of ordinary CNC lathe. The more advanced CNC lathe has a tool magazine, which can control three coordinate axes of X, Z and C. The linkage control axis can be (X, Z). ), (X, C) or (Z, C). Thanks to the addition of the C-axis and the milling power head, the machining function of this CNC lathe is greatly enhanced. In addition to general turning, radial and axial milling, surface milling, and center holes are not in the center of the part. Processing such as drilling.
More CNC lathe knowledge is available at http://m.fredbiz.com/